Ready to choose the best HARD HAT? Have a look at the top 10 HARD HAT list from below.
10 BEST HARD HAT
Best HARD HAT
MSA 475407 Natural Tan Skullgard Hard Hat with Fas-Trac Suspension
- Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350F.
- ANSI/CSA Type I Compliant, Protects from vertical impacts and penetrations
- ANSI/ISEA Z89.1-2014 (Class G) Compliant, provides dielectric protection up to 2,200 volts.
- Equipped with Fast-Trac III ratchet-style suspension for easy fast size adjustment and all day comfort
- Standard Size, Fits from 6 1⁄2" to 8"
MSA 475405 Skullgard Cap Hard Hat, with 4-point Fas-Trac III Suspension, Large, Natural Tan
- Skull Gard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350F.
- Ansi/CSA type I compliant, protects from vertical impacts and penetrations
- Ansi/ISEA Z89. 1-2014 (Class G) compliant, provides dielectric Protection up to 2, 200 volts.
- Equipped with fast-trac III Ratchet-Style suspension for easy fast size adjustment and all day comfort
- Date codes are molded into the underside of the shell’s brim with the year and month in which that specific shell was manufactured. **This date does not indicate a helmet’s service life; the service life begins when it is placed into service.** – See attached FAQ sheet”
3M Hard Hat, White, Lightweight, Adjustable 4-Point Ratchet, H-701R
- REDUCES PRESSURE POINTS: 3M’s unique, lightweight shell sits lower on the head to reduce pressure points and increase security
- ADJUSTABLE COMFORT: Featuring a four-point ratchet suspension system, it is adjustable, delivering a comfortable, secure fit that helps reduce discomfort and slippage
- UPWARD VISIBILITY: Reverse donning eliminates the brim and can help enhance upward visibility
- INSTALL SUSPENSION: 3M Hard Hats are shipped with suspension uninstalled to prevent distortion during shipping It must be correctly installed according to the instructions to provide maximum protection
- ANSI Z891: Meets the ANSI Z891 Class G and E for protection against electrical contact
Pyramex Ridgeline Cap Style Hard Hat, Vented, 4-Point Ratchet Suspension, Black Graphite Pattern
- ABS material – strong, yet ultra-light for seemingly weightless protection. Vented pressure pad — Keeps the straps in place providing an additional level of comfort
- Low profile design – offers a low center of gravity for better balance. Easy to grasp knob — Adjusts the suspension from 6 1/2 to 8
- Rear padded suspension – provides additional level of comfort on the wearers’ Neck
- 4-position harness points allows you to move the harness forward, backward, up or down – allowing for the most optimal position for ultimate comfort
- Replaceable sweat band – padded fabric and polyurethane foam for all day wear
Pyramex Ridgeline Full Brim Hard Hat, Vented, 4-Point Ratchet Suspension, Matte Black Graphite Pattern
- Constructed from ABS material — Strong, yet ultra-light for seemingly weightless protection
- Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hat
- Replaceable soft brow pad, suspensions and headbands also available
- 4-point suspensions can be converted to a 6-point suspension with the HP6PTSUS
- Meets ANSI Z89. 1-2009 standards, type 1, Class C
LIFT Safety - HDF50C-19WC Lift Safety DAX Fifty 50 Carbon Fiber Full Brim Hardhat (White)
- Carbon Fiber Hardhat Weighs in at 420g without suspension system. 550g with suspension
- Fiber reinforced resin shell for superior impact protection - 6 Point Suspension for Maximum Comfort
- Brim grip, exclusive design provides a secure feel - Triple Reinforced Crown For Superior Impact Protection
- Perforated Clarino synthetic leather comfort dome with molded EVA foam insert for additional shock absorbing protection to the top of head
- Meets ANSI Z89. 1-2014 requirements for Type 1, Class C.
MSA 475369 V-Gard Slotted Full-Brim Hard Hat, with 4-point Fas-Trac III Suspension, Standard, White
2 used from $7.01
- World recognized and trusted hard hat
- Available in both front brim (cap style) and full brim configurations
- Fas-Trac III ratchet suspension (4 pt) provides unsurpassed comfort
- Meets ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E)
- Molded and assembled in the U.S.
HDPE Hydro Dipped Blue/Silver Full Brim Hard Hat with Fas-trac Suspension
- Cool Air Flow /Full brim hat style will keep rain off the back of the neck
Lift Safety HDF-15NG DAX Hard Hat, Natural
2 used from $76.31
- Fiber reinforced resin shell for superior impact protection
- Brim grip, exclusive design provides a secure feel
- Perforated clarion synthetic leather comfort Dome with molded EVA foam insert for additional shock absorbing protection to the top of head
- Oversized ratcheting fitment dial to adjust size, easy to grip and use with gloves on
- 8 point Suspension system for a secure, comfortable fit
MSA 10126693 Replacement Ratchet , Large
- Designed with input from hundreds of customers
- For use with MSA Skullgard Helmets only
- Fas-Trac III ratchet suspension
- Flush rear lug attachments eliminate pressure points
- Three levels of nape strap adjustment for customized fit