If you are a true enthusiast of best DRYER VENT HOSE then you must take a look at the following top 10 DRYER VENT HOSE.
10 BEST DRYER VENT HOSE
Best DRYER VENT HOSE
iPower GLDUCT4X8C 4 Inch 8 Feet Non-Insulated Flex Air Aluminum Foil Ducting Dryer Vent Hose for HVAC Ventilation with 2 Clamps, 1-Pack, Silver
2 used from $9.08
- Ducting size: 4 inches (diameter) x 8 feet (length) when fully extended
- Thermal endurance: Temperature endurance range from 0 ~ 185°F. (-18℃ ~ 85℃)
- Wide applications: Kitchens, bathrooms, greenhouses, grow rooms, grow tents, etc.
- Easy installation: 2 pairs of 4 inch metal clamps made from stainless steel. Flexible length for exhaust fan blower/inline fan
- Fire proof coating: Flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance
STV-90 Dryer Duct Connector - DIY Easy Dryer Vent Hookup Kit - by Ziggurat Products
4 used from $13.19
- DOES THE TRICK: The Snap-to-Vent simple design gives you the power to hook up your dryer in just a matter of a few minutes. No more fiddling around with rigid metal dryer clamps!
- SAVES YOU MONEY: Our silicon seal ring gives you an airtight dryer connection, making your dryer more efficient while using less energy. This means your clothes get dryer faster and you save money on your power bill!
- AVOID THE HEADACHE: The STV-90 lets you to push your dryer up against your wall without kinking or crushing the hose and losing airflow. Simply slide it on and push your dryer back.
- WORKS WITH YOUR HOSE: We’ve updated our design to fit any 4” vent ducting, whether beveled or straight. You don’t need to go searching for the right sized clamp anymore--we’ve got you covered!
- EFFORTLESS AND DURABLE: Our sturdy elbow connector makes set up simple and a one-time project. Your STV-90 is sure to last longer than any other duct clamp out there!
Dryer Vent Cleaner Kit Vacuum Hose Attachment Brush Lint Remover Power Washer and Dryer Vent Vacuum Hose
4 used from $10.11
- [Remove LINT BUILD-UP] - Sealegend dryer vent cleaner kit removes lint that has accumulated for many years in the dryer vents, so your equipment runs more efficiently.
- [More than 33” long] - Flexible and handy vacuum hose attachments over 33inche in length allow for deep access to difficult places. Perfect for cleaning appliances that you can't move.
- [SUCTION CONTROL] - Switch between 2 suction control settings to best suit your cleaning needs. Perfect for light cleanups and a heavy-duty power clean.
- [HELPS PREVENT FIRES] - Using Sealegend Lint Remover regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
- [Package Contains] - 1* Sealegend dryer vent cleaner kit
STV-M Dryer Duct Connector - DIY Easy Dryer Vent Hookup Kit - by Ziggurat Products
- QUICK AND EASY INSTALLATION – The use of this dryer hose vent snap on kit is so easy and it requires no tools. It can be put together within minutes with just your own two hands. The simplicity of this snap on hose kit is that it allows you to begin using the dryer right away. Just pre-assemble the 90 elbow, 4" hose, and straight piece. Attach it to the dryer and the wall and it’s all set for use.
- THE BETTER CHOICE – This snap on dryer hose from ZIGGURAT provides a top-quality product for anyone in need of dryer connections. Our dryer connectors resolve the risk of potential fires, help create a better operating dryer, and don’t need to be attached by a clamp. These products are the best choice for simplicity and durability. This complete kit installs easily and works efficiently.
- BUILT TO LAST – Our STV-M snap to vent kit is designed to last a long time. With strong, yet flexible materials we have found the perfect way to create a clothes dryer connector that will get the job done for many years to come. ZIGGURAT’s dryer hose connector kit is made to be easily cleaned out and is made of quality materials to prevent crushing, ripping or other possible damage to the connection.
- TIGHT ATTACHMENT– This plastic dryer hose kit is made with soft rubber that will snugly attach to the hose you’re your dryer. The flexibility of this connector for dryer allows the pieces to fit properly together as well as hug the wall once the appliance is pushed against it. This kit is 8 x 4 x 5 inches and gives a strong connection without creating a bulky mess behind your clothes dryer.
- PRODUCTS MADE IN THE USA – The ZIGGURAT products were envisioned by a father and son who cared about safety and value. Our safe alternatives to dryer duct connectors were designed to improve household safety. We rely on quality to sell our products. All of our products are made in the USA with top-quality materials. We create household accessories that make life easier for our valued customers.
Deflecto Flexible Foil Dryer Transition Duct, 4" x 5', (F0405B/4)
1 used from $6.31
- 4" x 5' flexible foil dryer transition duct
- Ideal for clothes dryer duct, fresh air intake, non-insulated ventilation duct, and more
- Comes in pure aluminum fire resistant material
- 5 layers of polyester and aluminum foil gives this product longer use
VIVOHOME 4 Inch 25 Feet Aluminum Flexible Dryer Vent Hose with 2 Clamps for HVAC Ventilation Pack of 1
- IDEAL CONNECTOR - Used for exhaust fan applications to move and deliver air, which increases airflow and eases connections between spaces; It's compatible with front-load and top-load dryers/fans
- ADVANCED CONSTRUCT - Made of heavy-duty aluminum foil laminated and PET for durability; 3-layer design with flame-retardant coating is resistant to corrosion and temperature variations
- EASY INSTALLATION - Super flexible and super simple to set-up; With 2 bonus metal screw clamps, it easily slides right onto the duct fan, vent exhaust, carbon filter, or light reflector and tightly affixes to the joint
- DUCT PARAMETERS - 4 inches in diameter, 25 feet long when fully extended and can be minimally folded to 13.5 inches; Thermal endurance ranges from -22 to 266 Fahrenheit (-30 to 107 Celsius)
- WIDE APPLICATIONS - Commercial and residential air duct solution. Widely used in HVAC applications, bathroom venting, stove hood exhaust, dryer venting, kitchen cooking exhaust, grow room or greenhouse air circulation, etc
Deflecto Easy Connecting Dryer Vent Hook Up Kit, Flexible Semi-Rigid Aluminum Duct, 4" x 8' (HUPK8WA/4)
1 used from $14.58
- Easy Connecting Dryer Vent Hook Up Kit includes 2 Hooker-Upper protectors, 1 semi-rigid aluminum 8’ long duct and 1 gasket
- Duct twists into Hooker-Upper protectors and slides over dryer vent and outlet pipe; No clamps, tools or tape necessary. Maximum compatible pipe size (in.) - 4
- Hooker-Upper also protects the duct from being smashed behind dryer, which helps prevent unsafe dryer operation and longer drying times
- Kit contains 8’ long aluminum semi-rigid, flexible duct that allows quick, easy installation. Jaw Capacity - 1.25 inch (3.2 cm). Handle Length - 7.281 inch (18.5 cm)
- Gasket (included) may be needed for a proper fit on some dryers
Dryer Dock The Original Dryer Vent Quick Release - Two-Piece Dryer Hose Quick-Connect, Twist & Lock Tight, Fits 4 Inch Tubes
- DryerDock Quick-Connect - It is the easiest way to connect your dryer's vent to your house vent. This unique solution is easy to install, looks great when installed, saves space behind the dryer, and makes maintenance a snap. Fits 4" tubes with a 6" flange
- Easy Maintenance - Dryer Dock is a two-piece “Quick Release System” that enables quick access to your dryer vent hose and vent pipe, allowing for easy removal and cleaning. Keeping the vent clean, saves energy, and prevents dryer fires
- Eliminates Environmental Intrusion - Made of rigid ABS plastic and fastens together with a slight twist, the rigid design keeps the hose securely in place, eliminates air drafts, pest intrusion, saves energy, wear and tear on both dryer and clothes
- Prevents Fires - According to the National Fire Protection Association, dryer vent fires are the number one cause of household fires, nearly 17,000 home dryer fires are reported each year, causing around 51 deaths, 380 injuries, and $236 million in property loss
- The Original Dryer Dock - Patented under USP # 6,131,958. Dryer Dock is the “Gold Standard” of quick release in the industry for home and commercial applications, it is installed in more than 500,000 homes, factories, and offices. Proudly made in the USA
Omont Flexible Air Duct Hose, 4 Inch 10 Feet Non-Insulated Air Aluminum Foil Ducting Dryer Vent Hose for HVAC Ventilation, 2 Clamps Include, Great for Kitchen, Bathroom, Grow Tents, Dryer Rooms
- Ducting size: 4 inches (diameter) x 10 feet (length) when fully extended
- 3-Layer material: Designed for three layer: Aluminum Foil + PET + Aluminum Foil, Flame-retardant coating. Three layer makes it more durable and resistant to leaks, tears, and cuts.
- Steel-wire spiral structure: The steel wire helix to preserve the shape, keep your ventilation system free of rips and pin holes. Our air ducting flexible enough for you HVAC systems, arbitrarily bent, no rigid elbow, reducing the ventilation resistance and the leak of wind.
- Widely used: Our ducting is suitable for Heating Ventilation & Air Conditioning (HVAC) purposes. It will move and deliver air in kitchens (cooking exhaust), dryer rooms, bathrooms (smell and moisture exhaust) grow tent, green houses and air conditioner Etc.
- Quality warranty: We provide 12 months quality warranty, if you have any question please contact us and we will reply and help you solve the problem in 24 hours.
Builder's Best 011718 All Metal SAF-T Single Elbow Dryer Vent Duct Kit, UL Listed, 4" Diameter x 8' Length, Aluminum
1 used from $14.94
- This is a 8-feet UL Listed flexible metal (semi-rigid) transition duct attached to one Close Elbow. The original Close Elbow by Builder's Best is designed to make 90˚ turns within 4″
- Maximum velocity for this duct is 5,000 FPM. Temperature can range from - 100 degrees Fahrenheit to + 430 degrees Fahrenheit
- UL Listed and Labelled: Complies with all clothes dryer manufacturer recommendations
- Comes with 2 additional steel screw clamps
- Quality made in the USA by Builder's Best, Inc. Builder's Best brand is a US registered trademark. SAF-T-DUCT is a registered trademark by Builder's Best, Inc. SAF-T-DUCT Dryer Venting is the trusted solution for professional installers nationwide. It meets all clothes dryer manufacturer specifications