You can check out best DRYER VENT HOSE FOR TIGHT SPACE from our top 10 list. Why should you trust our recommendation? Because we always test various products and then come up with the best product in the budget. We hope you will find that product you need from our suggestions.
10 BEST DRYER VENT HOSE FOR TIGHT SPACE
Best DRYER VENT HOSE FOR TIGHT SPACE
Appliance Pros AP4395481 Non Insulated Flex Air Aluminum Foil Duct Exhaust Vent Hose for 4396009RP Electric Dryer, Compatible with Major Dryer Brands and Models
- HEAVY-DUTY REPLACEMENT - With its flame-retardant coating, this Flex Air Aluminum Duct forms a tight seal to direct fumes and humidity safely away from living spaces. The 3-layer thick aluminum foil laminate encapsulates a high density, corrosion-resistant wire helix that's constructed to replace inferior vinyl ducts. Upgraded metal clamps ensure a superior dryer vent hose connection that won't fail. Built-in steel wire offers reinforcement and long lasting performance.
- UNIVERSAL COMPATIBILITY - Appliance Pros 5FT Vent is highly designed to fit top dryer brands. It can be used as a replacement vent for appliances from Kitchen, Bathroom, Greenhouse, Grow Room, Grow Tent, and Laundry Dryers.
- HASSLE-FREE INSTALLATION - The flexible length of this vent offers a quick and easy setup. Great for DIY Setup by contractors or homeowners. Each kit includes two premium 4-inch worm hose clamps for a secure connection to wall and rear of dryer.
- SPECIFICATIONS - Temperature endurance range from 0 to 185 degrees Fahrenheit. (-18 Degrees to 85 Degrees Celsius). The Duct measures 4 inches in diameter by 5 feet in length when fully extended.
- BACKED BY WARRANTY - This Non-Insulated Flex Air Aluminum Ducting Replacement for Dryers has been quality tested and is backed by the Appliance Pros' 1 Year Limited Warranty.
Builder's Best 084149 SAF-T-DUCT Zero Periscope Adjustable Dryer Vent Periscope, Adjustable 0-5" Length
18 used from $6.00
- Note : The product swivels to provide angles, but the homeowner must measure and watch the video. Item fits all dryers, space behind dryer and distance to vent must be measured before purchase
- Made with 100% aluminium, this periscope features 2" x 6" rigid construction with a smooth interior. Two sections telescope from 0″ to 5″. Sections are not reversible.
- One end is a 4″ male, crimped rotating snap-lock collar that fits into wall outlet. The other end is a 4″ female, draw band rotating collar fits over dryer outlet.This SAF-T-DUCT Zero Periscope is used for close clearance dryer transition duct. It solves situations where the dryer outlet overlaps or is within 5″ of the wall outlet. The smooth interior decreases air friction for excellent airflow.
- Meets clothes dryer manufacturer specifications. Do not use plastic or metal foil vent which crushes easily behind the dryer. Installation instructions included.
- Quality made in the USA by Builder's Best, Builder's Best brand is a US registered trademark. SAF-T-DUCT is a registered trademark by Builder's Best, SAF-T-DUCT Dryer Venting is the trusted solution for professional installers nationwide. It meets all clothes dryer manufacturer specifications.
Ziggurat Dryer Duct Connector | STV-90 Version 2 | Laundry Dryer Snap to Vent 90 Degree Elbow
2 used from $14.95
- DOES THE TRICK: The Snap-to-Vent simple design gives you the power to hook up your dryer in just a matter of a few minutes. No more fiddling around with rigid metal dryer clamps!
- SAVES YOU MONEY: Our silicon seal ring gives you an airtight dryer connection, making your dryer more efficient while using less energy. This means your clothes get dryer faster and you save money on your power bill!
- AVOID THE HEADACHE: The STV-90 lets you to push your dryer up against your wall without kinking or crushing the hose and losing airflow. Simply slide it on and push your dryer back.
- WORKS WITH YOUR HOSE: We’ve updated our design to fit any 4” vent ducting, whether beveled or straight. You don’t need to go searching for the right sized clamp anymore--we’ve got you covered!
- EFFORTLESS AND DURABLE: Our sturdy elbow connector makes set up simple and a one-time project. Your STV-90 is sure to last longer than any other duct clamp out there!
Dryer Dock The Original Dryer Vent Quick Release - Two-Piece Dryer Hose Quick-Connect, Twist & Lock Tight, Fits 4 Inch Tubes
1 used from $9.49
- DryerDock Quick-Connect - It is the easiest way to connect your dryer's vent to your house vent. This unique solution is easy to install, looks great when installed, saves space behind the dryer, and makes maintenance a snap. Fits 4" tubes with a 6" flange
- Easy Maintenance - Dryer Dock is a two-piece “Quick Release System” that enables quick access to your dryer vent hose and vent pipe, allowing for easy removal and cleaning. Keeping the vent clean, saves energy, and prevents dryer fires
- Eliminates Environmental Intrusion - Made of rigid ABS plastic and fastens together with a slight twist, the rigid design keeps the hose securely in place, eliminates air drafts, pest intrusion, saves energy, wear and tear on both dryer and clothes
- Prevents Fires - According to the National Fire Protection Association, dryer vent fires are the number one cause of household fires, nearly 17,000 home dryer fires are reported each year, causing around 51 deaths, 380 injuries, and $236 million in property loss
- The Original Dryer Dock - Patented under USP # 6,131,958. Dryer Dock is the “Gold Standard” of quick release in the industry for home and commercial applications, it is installed in more than 500,000 homes, factories, and offices. Proudly made in the USA
UD48S 4" Dryer Vent Space Saver Aluminun Venting Duct 90 Inlet Straight Outlet
- Dryer Venting Space Saver stock number UD48S.
- 90 Inlet / Straight Outlet.
- space saver aluminum duct is ideal for use in tight fitting clothes dryer applications.
- This duct allows the dryer to be placed 3 from the wall for optimum space utilization.
- With a 2-piece aluminum construction this duct also extends from 28 - 45 in length.
STV-M Dryer Duct Connector - DIY Easy Dryer Vent Hookup Kit - by Ziggurat Products
6 used from $34.14
- QUICK AND EASY INSTALLATION – The use of this dryer hose vent snap on kit is so easy and it requires no tools. It can be put together within minutes with just your own two hands. The simplicity of this snap on hose kit is that it allows you to begin using the dryer right away. Just pre-assemble the 90 elbow, 4" hose, and straight piece. Attach it to the dryer and the wall and it’s all set for use.
- THE BETTER CHOICE – This snap on dryer hose from ZIGGURAT provides a top-quality product for anyone in need of dryer connections. Our dryer connectors resolve the risk of potential fires, help create a better operating dryer, and don’t need to be attached by a clamp. These products are the best choice for simplicity and durability. This complete kit installs easily and works efficiently.
- BUILT TO LAST – Our STV-M snap to vent kit is designed to last a long time. With strong, yet flexible materials we have found the perfect way to create a clothes dryer connector that will get the job done for many years to come. ZIGGURAT’s dryer hose connector kit is made to be easily cleaned out and is made of quality materials to prevent crushing, ripping or other possible damage to the connection.
- TIGHT ATTACHMENT– This plastic dryer hose kit is made with soft rubber that will snugly attach to the hose you’re your dryer. The flexibility of this connector for dryer allows the pieces to fit properly together as well as hug the wall once the appliance is pushed against it. This kit is 8 x 4 x 5 inches and gives a strong connection without creating a bulky mess behind your clothes dryer.
- PRODUCTS MADE IN THE USA – The ZIGGURAT products were envisioned by a father and son who cared about safety and value. Our safe alternatives to dryer duct connectors were designed to improve household safety. We rely on quality to sell our products. All of our products are made in the USA with top-quality materials. We create household accessories that make life easier for our valued customers.
Whirlpool 4396037RP 0-to-18 Inch Vent Periscope
8 used from $25.81
- Adjustable dryer vent (up to 18 inches)
- Includes a male snap-lock fitting and extra long draw-band collar for easy installation
- Closest to wall application is 2-1/2 inches
- Helps safely save valuable space in your laundry room
- Part No. 4396037RP
Lambro Industries 4004 Quick Connect Flexible Aluminum Duct Dryer Vent Kit
2 used from $18.15
- Item Weight: 2.2 lb
- Country of Origin: United States
- Brand name: Broan-NuTone
- Item Dimensions: 60.0"L x 4.0"W x 4.0"H
Lambro 3005 Vent Tite Fit, Titefit 90 Degree Rectangular Dryer Duct, Extends from 18" to 30", 26 Gauge Aluminum
- Tight space dryer venting solution
- Extends from 18" to 30"
- 26 gauge aluminum
- Package Contains: (1) - TiteFit 90 Degree Rectangular Aluminum Dryer Duct
- Package Size: 6 1/2" x 4 1/2" x 24"
Whirlpool 4396014 29-Inch to 50-Inch Vent Periscope
1 used from $38.68
- This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
- Package contains (1) Dryer Telescoping Vent Periscope
- Multi screwdriver needed for installation
- This product is a universal accessory item compatible with several brands