BEST CIRCULAR SAW TRACK GUIDE

Indeed, there are lots of CIRCULAR SAW TRACK GUIDE available so it is tough to find the best CIRCULAR SAW TRACK GUIDE. Our expert team did that job for you and made a list of top CIRCULAR SAW TRACK GUIDE which you can find below.

10 BEST CIRCULAR SAW TRACK GUIDE

IMAGE PRODUCT RATING PRICE
1. Kreg KMA2685 Rip-Cut Circular Saw Guide
2. Circular Saw Track (Circular Saw Track)
3. ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and...
4. Bora 50" NGX Clamp Edge, Straight Cut Guide For Circular Saws | 50" Cutting...
5. Bora 100-Inch NGX Clamp Edge, Straight Cut Guide For Circular Saws Includes...
6. Bora 50” WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors,...
7. Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch...
8. Bora 36" NGX Clamp Edge,Straight Cut Guide For Circular Saws, 36" Cutting...
9. Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors,...
10. WEN CT9502 100-Inch Track Saw Track Guide Rail and Adapters

Best CIRCULAR SAW TRACK GUIDE

Kreg KMA2685 Rip-Cut Circular Saw Guide

 in stock
11 new from $39.00
Free shipping
View On Amazon
Amazon.com
as of May 14, 2021 3:10 pm

Features

  • Make rip cuts and crosscuts up to 24" Wide
  • Cut multiple pieces to the same size With just one setup
  • Use the oversize edge guide for precise control throughout the cut
  • Eliminate need for marking, measuring, and layout lines
  • Take your saw to the material instead of having to take your material to the saw

Circular Saw Track (Circular Saw Track)

 in stock
23 new from $79.00
Free shipping
View On Amazon
Amazon.com
as of May 14, 2021 3:10 pm

Features

  • Rip, crosscut, and make angled cuts up to 50" Long in plywood, MDF, and panels
  • Simply align the guide Track with your marks to make accurate cuts
  • Hold track in place without clamps thanks to anti-slip guide strips
  • Prevent splintering with anti-chip strips that support material during the cut
  • Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)

 in stock
2 new from $57.53
Free shipping
View On Amazon
Amazon.com
as of May 14, 2021 3:10 pm

Features

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!

Bora 50" NGX Clamp Edge, Straight Cut Guide For Circular Saws | 50" Cutting Length, 544050

 in stock
9 new from $49.97
3 used from $36.62
Free shipping
View On Amazon
Amazon.com
as of May 14, 2021 3:10 pm

Features

  • Clamping end moves with handle for easy adjustability from one side
  • Locking handle grabs work surfaces for a secure grip that won’t budge
  • Made of heavy-gauge, rigid aluminum for extreme durability
  • Easily increase length up to 100 in. By adding the Bora NGX 50-inch aluminum extension
  • Winner of the 2019 Pro Tool Innovation Award (PTIA) in the Track Rail category

Bora 100-Inch NGX Clamp Edge, Straight Cut Guide For Circular Saws Includes 50-Inch Clamp Edge & 50-Inch Extension For 100-Inch Cutting Length, 544100

 in stock
3 new from $94.59
2 used from $87.80
Free shipping
View On Amazon
Amazon.com
as of May 14, 2021 3:10 pm

Features

  • Clamping end moves with handle for easy adjustability from one side
  • Locking handle grabs work surfaces for a secure grip that won’t budge
  • Made of heavy-gauge, rigid aluminum for extreme durability
  • Use with circular saws, routers, Jig saws, and other portable power tools
  • Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors

Bora 50” WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 50 Inch Cutting Length, 545050

 in stock
8 new from $44.98
Free shipping
View On Amazon
Amazon.com
as of May 14, 2021 3:10 pm

Features

  • GET IT STRAIGHT EVERY TIME: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 50-inch length allows you to saw with precision and skill
  • LOCKED IN: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge while you cut
  • MAKE MEASURING EASY: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy
  • SUITED FOR YOUR NEEDS: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts
  • ADDITONAL ACCESSORIES: The BORA WTX Saw Guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide

Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch Precision Edge Guide

 in stock
8 new from $117.12
View On Amazon
Amazon.com
as of May 14, 2021 3:10 pm

Features

  • CUTS: Make rip cuts and crosscuts up to 24" wide / Cut multiple pieces to the same size with just one setup / Prevent splintering with anti-chip strips that support material during the cut
  • GUIDE: Use the oversize edge guide for precise control throughout the cut / Eliminate need for marking, measuring, and layout lines / Hold track in place without clamps thanks to anti-slip guide strips
  • EASY SAWING: Take your saw to the material instead of having to take your material to the saw
  • VERSATILE: Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels / Simply align the Guide Track with your marks to make accurate cuts
  • BUNDLE INCLUDES: Kreg KMA2700 Accu-Cut 48-Inch Circular Saw Guide Track System

Bora 36" NGX Clamp Edge,Straight Cut Guide For Circular Saws, 36" Cutting Length, 544036

 in stock
5 new from $45.89
View On Amazon
Amazon.com
as of May 14, 2021 3:10 pm

Features

  • Clamping end Moves with handle for easy adjustability from one side
  • Locking handle grabs work surfaces for a secure grip that won’t budge
  • Made of heavy-gauge, rigid aluminum for extreme durability
  • Easily increase length up to 86 in. With aluminum extensions

Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 100 Inch Cutting Length, 545100

 in stock
5 new from $82.99
2 used from $76.35
View On Amazon
Amazon.com
as of May 14, 2021 3:10 pm

Features

  • GET IT STRAIGHT EVERY TIME: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length allows you to saw with precision and skill
  • LOCKED IN: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge while you cut
  • MAKE MEASURING EASY: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy
  • SUITED FOR YOUR NEEDS: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts
  • ADDITONAL ACCESSORIES: The BORA WTX Saw Guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide

WEN CT9502 100-Inch Track Saw Track Guide Rail and Adapters

 in stock
7 new from $65.69
Free shipping
View On Amazon
Amazon.com
as of May 14, 2021 3:10 pm

Features

  • Includes two 50-inch track saw tracks and a set of adapters
  • Make straight and precise cuts over 8 feet long
  • Included adapter set features four set screws for maximum stability
  • Designed to fit the WEN CT1065 Plunge Track Saw
  • Universal design compatible with Evolution, Makita and Festool track saws